These are 2 cable covers for Nami Burn-E e-scooter. Middle cover can be inserted by bending in. Also it can be cut by scissors if needed. Bottom cover needs 2x M5 20mm screws in front of Nami deck. For model you need two threaded inserts M5. Enjoy.
Print settings on pictures:
0.4 nozzle, 0.2mm layer height, 100% infill, Prusament PETG Galaxy Black. Orientation as on last picture in gallery. Organic supports recommended in both rounded edges.
16.5. 2023 added M6 version (default is M5 but some people cut M6 because M5 thread was damaged)
The author marked this model as their own original creation.