##### Updated 2023/05/10 #####
Added spacers so the components stay in place a little better and the cardboard spacers can be tossed.
Here is a short video on how to fit everything into the box.
##### Updated 2023/05/03 #####
Updated solo play console to support extreme mode. Holds 2 criteria cards. Pictures added.
##### Updated 2023/04/29 #####
Added a console for solo play so that I don't have to crowd the cards around the hexagon.
##########
Where as other people kept the cardboard insert to line the walls, I used the inside parts of the cardboard insert. This insert isn't meant to hold everything in perfect place and things may slide depending on how you pack it. But! This insert will allow setup of the punch cards very quickly. You can rifle through the criteria cards and verification cards while they are in the holders to find the appropriate ones and then put them aside neatly with little effort.
Benefits include:
Designed in tinkercad.
The player aid tray is a remix of a very, very nice tray by @Angst03_523402. I trimmed the walls to 1.5mm and made the bottom layer 1mm to reduce the amount of filament needed. I also reduced the length from 151mm to 148mm.
Printed at .6 layer height with a .8mm nozzle. Your results may vary with different settings and nozzle sizes.
Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.6
Infill:
5%
Filament brand:
Cheap stuff
Filament color:
Orange
Filament material:
PLA+
The author remixed this model.