Korum fishing chair rear rod rest

A rear rod-rest attachment for the original Mk1 Korum accessory chair. Designed to take 1/4" (7mm) rods/dowel, and includes an anti-'poke yourself in the shin' sleeve.

Requires 2 x 45mm (thread length) M6 bolts. Print main body with 4 shells and 35% infill for strength. Sleeve: 3 shells, concentric surface infill, wide brim recommended.

Print instructions

Unassociated tags: korum accessory chair , korum chair, rear rod rest, rod rest

Category: Sport & Outdoors Summary

A rear rod-rest attachment for the original Mk1 Korum accessory chair. Designed to take 1/4" (7mm) rods/dowel, and includes an anti-'poke yourself in the shin' sleeve.

Requires 2 x 45mm (thread length) M6 bolts. Print main body with 4 shells and 35% infill for strength. Sleeve: 3 shells, concentric surface infill, wide brim recommended.

Print Settings

Printer Brand: Creality

Printer: Any

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 35%

Notes:

Use a wide brim when printing the sleeve to aid bed adhesion.