Simple Apple Pen case with embedded magnets to hold it.
Optional decorative colored Icon on the lid - no MMU required.
Includes 2 compartments for 4 protective silicone tips each.
Additional hardware needed: 2 6mmx3mm magnets (OPTIONAL).
Mind magnets polarity when installing.
-----------------------------------------------------------------------------------
Import Lid+Icon file into PrusaSlicer, after import and placement split to objects:
Do not move or arrange after!
Print the icon 1st by unchecking lid body:
Slice and save gcode.
Now unselect other 3 stls:
Save the gcode (different name.
Print 1st gcode with desired filament, when done remove skirt only!!!
Change filament to base one.
Print 2nd gcode on top.
Done.
The author marked this model as their own original creation.