Xbox One/Core Controller Wall Mounts/Hangers

An easy to print wall-mounted hanger for the Xbox One and Xbox Core controller bodies. Designed to fit both large and medium size Command Strip wall adhesives. Can also be mounted using screws or picture-hanging nails Requires zero support material when printed on the side and can be printed with minimal infill.

Mounting

When mounting to wall, screws or picture-hanging nails should be placed 1.25" apart.

My Make

I printed this on a Creality Ender 3v2 in DURAMIC 3D PLA Plus using the default “Normal” PLA settings on Prusa Slicer 2.5.2, with the following changes:

• 4 solid top layers
• 5% gyroid infill

The first example print is the large w/ holes model, with slightly undersized mounting holes. The second example print is the small thru-hole model. Please note, I recommend using command strips with the non-hole models, picture-hanging nails with the partial hole models, and screws with the small thru-hole model. Screw anchors should be used with screws in drywall.

Design

Designed using FreeCAD. Based on the Xbox Core controller. I may be adding more styles to this model in the future.