Raspberry Pi 4b SATA SSD modular frame case

Raspberry Pi modular case supports up to 2 SATA SSD disks and a fan.  This is modular because you could use a simple implementation with 1 SATA SSD disk and only the couple to the SATA SSD disk or you could use 2 disks, an OLED 128x64 display and the full frame around.

Printing Instruction

• Use PETG preferably
• Use support for the SATA SSD pocket only using the intelligent Prusa slicer option 

Assembly Materials & Instructions

• I'm using this SATA SSD cable - Amazon.es
• M3 screws for SATA SSDs
• M2.5 for Raspberry Pi screws - I'm using nylon screws - Amazon.es 
• OLED 128x64 display - Amazon.es
• Raspberry Pi 4 Case Fan - www.raspberrypi.com
• screw gently to avoid damaging the coupling between the hard drive and the raspberry pi