LACK FAN 120mm ENCLOSURE

enclosure for a 120mm fan (with 38mm width) to fit into the table top of an IKEA lack
10
49
0
398
updated April 30, 2023

Description

PDF

I needed an enclosure to hold the 120mm x 38mm fan I bought to ventilate my new ikea lack enclosure. I couldn't find anything pre-made that met these specifications so I made my own. 

I printed it in PET-G but it should print fine in PLA. I printed at 15% infill but wish I had done 30% as the low infill resulted in a messy end product. This can be printed without supports as long as the brim is placed on the build plate. 

The fan that I have is:

“AC Infinity AXIAL 1238, Muffin Fan, 120V AC 120mm x 38mm High Speed, UL-Certified for DIY Cooling Ventilation Exhaust Projects”

 

*update- when I went to use this, I found that the side hole for the power cord was not in the correct location and ended up having to cut an additional hole, FYI. Otherwise it does work well. 

Tags



Model origin

The author marked this model as their own original creation.

License