DeskPi PicoMate Board Nest

This is to hold/protect pins on the DeskPi PicoMate prototyping board for Pi Pico/W.  I printed mine on a Mk3S+ with 0.6 mm nozzle at 0.4 mm layer height and 25% infill.  PETG is my goto, so I don't know how thermal shrink may affect other plastics. The holes are counterbored from the bottom for an M3 x 0.5 x 8mm socket head cap screw. I removed the gold standoffs from the original PicoMate and screwed into the threaded inserts on the board (see photos).  I hope you find it useful.