Its a tight fit but it will work, it could be that you have to file it slightly to make it snap together.
After it snapped together you can use a small little drop of glue to make sure the mech part is sollid connected to each other.
I preffer to glue it on the side that faces into the case.
Now you will have a solid side panel you can screw on to the case.
I prined the 2mm thick panel in PETG and it works perfect!
I included:
So feel free to Remix it and let me know what you think of it!
Have fun !!!
The author marked this model as their own original creation.