This model was built off the pre-existing design from @Bananenminister.
This is my first design so I may do tweaks in the future if problems persist but I have prototyped several models with PLA, PLA+ and PETG. and I would strongly suggest these to be printed in PETG since PLA variants may warp from heat over time.
These are the quantites and parts you will need from @Bananenminister's files :
16-Clips
15-Chain links
1- Ground Plate
1-Hook (to secure ground plate)
My Clamp in addition will require:
1-TOP Bed Cable Clamp
1-BOTTOM Bed Cable Clamp.
2-M3 Nuts (Pressed into recessed Bottom Bed Cable Clamp housing)
2- M3x10(or longer) Cap Screw Bolts.
Printed at:
3 walls
20% Infill
Printed with Supports.
I have designed this bed cable clamp since there has been no full cable chain designs made for SPECIFICALLY the Creality Ender 3 S1 Pro since the cable is angled from the base of the printer to the bed plate. The Clamp will provide stress relief to the cable connection, while @Bananenminister's design will protect the bottom of the cable going to the mainboard.
Please enjoy printing and I hope I can help save you the headache that many have dealt with worn out cables.
The author remixed this model.