Dekunu One altimeter chest mount (Pro version)

Dekunu One altimeter chest mount.

Dekunu one is a device that seamlessly threads information and awareness into skydiving.

Recommended print settings:

• Layer height: 0.2mm.
• Extrusion width: 0.4mm, forced.
• Infill percentage: 42%
• Infill type: grid, gyroid, honeycomb, triangle, or cubic -or - support cubic if you want to go fast.
• Walls: 4
• Solid top/bottom layers: 4.
• Supports: Classic.

Recommended filaments:

• ASA-CF
• PETG-CF
• PETG
• TPU (if you feel lucky).
  
  

My model is inspired by this, re-drawn using Shapr3D in full to achieve perfect tolerances and improve original model weak points.

Added vertical mounting possibility and additional M3 heat set insert to secure altimeter device.