MLOK Sling loop

MLOK standard attachment. A strong, minimalist loop for a mashhook, HK snaphook, or a loop of paracord for sling attachment. 

Fitment was tested on a ‘real steel’ handguard. The hardware I used for testing and fitment was taken from a QD socket I had laying around. As with anything hardware, bolt head dimensions may vary depending on vendor. 

PLA+ should be plenty strong for this. Nylon or PETG would probably be ok as well, but I have not tested those two materials. 

See slicer screen shot for support and orientation - It's kind of important to orient this standing like pictured, this way the loop sections layer lines are solid loops to prevent pulling it apart at one of the layers.