Monitoring of PC parameters was made according to the project of Alex Gyver using a screen lsd 2004 and arduino nano v3 with usb-c port.
All parts are printed without supports. I printed with a 0.6 mm nozzle, but I will add an z-code under a 0.4 mm nozzle as the most common.
For assembly (in addition to a soldering iron, etc.) you need 4 M3x20 screws and 4 M3x5 screws
Link to project page https://alexgyver.ru/pcdisplay/
The author marked this model as their own original creation.