Wings of Freedom Bookends

Remeber the words of captain Erwin. Shinzou o Sasageyo! The wings of freedom are an iconic symbol of Attack on Titan; so, I turned them into a 2 part bookend for everyone to enjoy. Each part takes about 5 hours to print depending on your slicer settings.

Print settings: (I use a Flashforge Adventurer 3 pro)

• Layer Height: 0.25mm - 0.3mm
• Print speed: 60mm/s
• Shell count: 2
• 0% infill
• No raft, no supports
• Brim is optional