Klask Accessory Box

A box to store a set of accessories for the game of Klask.
6h 43m
1× print file
0.20 mm
0.40 mm
87.00 g
In the contest Models with Magnets
31
118
1
983
updated September 28, 2023

Description

PDF

I love to play Klask with the family but when the game is left unattended, things can get misplaced or outright lost (I'm talking to you white magnets!). To solve this problem, I designed a box where you can store all the accessories (well, you need two at minimum for a complete set, but alas).

The accessory box is designed to be attached to the klask board. It snugly fits between the leg and the board and it doesn't come off unless you apply a little bit of force, so you can move the board with the attached boxes and they won't come off. It also uses magnets to keep the lid closed while on the move, but it easily opens when you need to. You can even leave them in place while playing as long as the stay on the opposite side of you dominant hand.

Made with Blender precision modeling.

You can get the magnets from here: https://a.aliexpress.com/_msetv44 (I know the dimensions don't seem to match, but that's just because of the tolerances they use - I had no problems with the fit).

*If you don't know what Klask is, go to https://www.klaskgame.com/ to learn more about the game. It's really fun. 

Print instructions

  • Material: I used PLA (PolyTerra Saphire Blue and Hatchbox White).
  • Infill: 15%
  • Layer height: 0.2 at 0.4 nozzle
  • Color change: Only for the lids, start with blue, switch to white at layer 11 and back to blue on layer 23 (if you use the provided 3mf file). If you are only slicing the lid, the color changes should be on layer 8 and 16 respectively.
  • Magnets: 2x Neodymium magnets 5.75mm x 19mm x 1.75mm
  • Supports: Everywhere

Tags



Model origin

The author marked this model as their own original creation.

License