SpiderPig - Multicolour

Taking the original model from Johination and spending many frustrating hours in Fusion360 making the model solid (dealing with millions of triangles is hard on the cpu) so that it can be painted in Bambu Studio / Orca slicer and printed in mutlicolour.

Ive painted this using 6 colours but you can trim it down if you have 1 AMS I'm sure.

3mf file is included and ready painted but if you want to do it yourself the STL is also attached. I've set this so that the model is printed face down on a PEI sheet for a nice texture on that first layer.  If you are painting yourself check the orientation is how you want it.  A layer difference of 0.05 is good enough so you can paint but the slicer see's this as all one layer.

I printed at 0.16 with standard other settings, default infil of 15% was fine.  Skin colour was Eryone gold which turned out surprisingly well (well terrible if you expected gold but great for this :D)

Be careful of the prime lines on the build plate, I removed them manually at the very start just to be sure it didnt end up embedded within the print.

Enjoy :)