Pixel Charging Station

I wanted to create a neat and tidy place to put my Pixel phone, using the original Pixel Stand Pixel Watch, and Pixel Buds Pro (should work with any wireless charging device) to charge at night as well as a place to keep my reading glasses off of the table and a place for the Google TV remote. The result is this tray (too late for the contest sadly).

I recommend https://www.printables.com/model/295557-pixel-watch-charger-for-pixel-stand for the watch charger which is what you'll see in the photo.

The Pixel Stand fits into the spot on the right. In addition to embedding the original into the tray, I've added some slots at the back and bottom to allow up to three wires to pass through into the channel under the tray.

The wireless charging pad fits under the back left part of the tray with a cutout that fits the Pixel Buds Pro. If you print in white or another light color, the lights from the charging pad (if any) will show through. The space will fit up to a 100 mm diameter pad. 

The glasses holder is just the Geometric Glasses Holder model embedded into the tray unchanged.

The spot for the Google TV remote is sized to fit the original Google TV remote with a Sideclick attached. 

I printed on a Snapmaker F350 using PLA. Supports are needed at least for the void under the tray for the charging pad and the wire channel.