Land Rover Bulkhead Wiring Harness Plate (AMR3098, RNC927, PRC1333)

Replacements for the original wiring harness cover can be expensive to buy with limited custimizability. Print your own!
8
75
1
487
updated April 12, 2023

Description

PDF

General

The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands.

But you can use the blank plate to remix your own version if you have different needs for your car 😄

The gasket is optional and does not exist with the original plate, however it can help to reduce water/dirt/noise ingress into the passenger compartment.

 

Print Settings

  • Best to use ABS/ASA/PETG, the engine compartment can become quite warm.
  • Even better: Have the plate laser or plasma cut from metal :)
     
  • The gasket can optionally be used and printed from TPU or laser cut from rubber.

 

Consider liking and posting a Make if you enjoyed this model :)

Tags



Model origin

The author marked this model as their own original creation.

License