Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws.

Is a strong and sturdy connection but it’s a pain to install and removes the movebility of pegboard. Would print the normal hooks if you can.

A brilliant design that I printed as part of this battery holder. Thanks!

These M3 T-nuts are perfect for my Skadis boards in my workshop. Its so much easier than having to use a nut.

T-nuts are definitely my go-to for Skadis mounts, and this threaded variant gives me another option

Great design, works well. And thank you for including the F360 file, made it super easy to modify it to fit #6-32 screws.

Skadis T-nut, remix for UNC #6-32 screws (standard wall plate screws) by Redlow | Download free STL model | Printables.com

works great, I used it for a tape measurer holder and it gets its fair share of beating and no problems

I needed the M3 sized mount for a battery holder I printed. This worked perfectly!

The nut still awaits the sinkhole screw to arrive, but a first test showed the M3 is going in nicely. (edited)

Working perfectly. Printed in ABS

Had to play with printer settings as these are really small, worked well and holds strong onto Skadis board