Open air ITX case with radiator support

This is open air ITX case that I designed to be able to be printed on an Ender 3.  After using it for about 10 months before switching back to an enclosed case I did notice a bit of bending towards the front but this could be because of print setting and filament used. You will need to find your own way of supporting the gpu depending on which mounting option you use. 

Be mindful that the vertical gpu mount was designed with a CoolerMaster AIO and ASUS 6750xt dual so not all pc combos will work.

its possible that the model when downloaded could scale wrong if this happens scale up to 2540%

Requires 

M5x20 to mount rad support 

M3s with length depending on what rad you are using 

standard motherboard mounting screws 

phantek PCIE 4.0 riser cable for vertical gpu option