Wall mount remote holder for Roku etc

Screw the holder to your wall with drywall screws and keep your remote in there.
3
78
1
292
updated May 29, 2024

Description

PDF

There is a sacrificial strip included to help your print not pop off the build plate as shrinkage happens, especially if you use ABS. You'll cut that off. I suggest a brim with a small gap too.

Make sure the bridging angle is good for your printer or you may have to put a small support in the middle to assist that. 

Added the freecad file so folks can play with it as needed.

Also added a slightly larger and more rounded version. This will work with more remotes and ensure your screw doesn't scratch the back. Scale it down slightly (5%) for standard roku remote.

Tags



Model origin

The author marked this model as their own original creation.

License