Stacking box

This is a light stacking box to store or organize things in drawers, shelves, desktop…

It is designed to be printed using vase mode, with little reinforcement on the sides to hold other boxes above. The size is 12x12x8cm. It needs about 35g of plastic and 2h to print.

Print settings

• vase mode
• 0.2mm layer height
• 4 bottom layers
• increase external perimeter speed and solid infill speed to reduce time

On my MK3s I works great with 70mm/s external perimeter speed and 200mm/s solid infill and top solid infill. It should be even quicker with 0.3mm layer height and 3 bottom layers but I haven't tested it.