Very cool model! It looks nice and does its task. Just make sure you have the right model of ac power hub. I modified mine with mounting options on the side.
Meanwell LRS 350 PSU Cover for SOVOL SV06
Remixed from Meanwell LRS/RSP PSU Bear Upgrade *New Version*
55
333
6
1630
updated April 5, 2023
Makes
Comments
Does this work for the SV06+ as well?
Damn man, it fit so perfectly. hole correctly aligned, good tight fit. Cant ask for better. Thank you
Fit perfectly, thanks!
PLA
Used tree supports
TH3D has a how-to video on YouTube if you need help putting this together.
Was able to print this out and change the PSU from my SV06 plus with a meanwell.
Thank you for this STL.
the stl has a gap in it near the top. i noticed when the print had completed. that whole top part was not attached.
View 4 more comments
@JamesH_607945 I can't figure out how to slice it without the gap, either. Does anyone have a work-around? I'm using PS. I'm new but haven't had trouble with any other slicing or printing.
@PIEngineer_580794 definitely is present there, and even though I sliced and printed with the gaps there, after several months of occasional unplugging and plugging the power cable back in, it started splitting along the top line where the gap is. Went ahead and fixed the model, as James is using the "it works on my machine" excuse even when shown evidence of design failure
Printed in PETg with .6mm nozzle. Fits nicely on my new meanwell PSU. Highly recommend it. Also I highly recommend switching the basic stock PSU for a meanwell PSU. Stock one is really cheap and is also a fire hasard. (edited)
It's a tight fit but that works.
Thanks.
Printed in .6nozzle pla+
No supports (edited)
