Louqe Ghost S1 feet and handles (Mac Pro inspired)

Feets for raising the case and optimize airflow, handles for aesthetics
6
32
0
848
updated April 6, 2023

Description

PDF

Decided to change the look of my Louqe Ghost S1 mk3 and add spacing between the desk and case to give it more airflow. 

I opted for a Mac Pro type of styling with carrying handles on top of the case. The handles are mostly for aesthetics but are sturdy when printed laying down. 

The handles could be mounted with m3 bolts directly depending on your print accuracy, otherwise an m3 tap could be used to make proper threads in the handle.

To mount the feet and handles to the case you will need:
8 m3x16 bolts (preferably with a flat underside of the head and not countersunk)
8 m3 nuts
8 m3 washers

It is possible to mount the feet to the existing tapped holes replacing the short m3 bolts for the bottom plate. To get the alignment better in line with the top handles I mounted mine with nuts and washers in the fan slots on the bottom plate.

Tags



Model origin

The author marked this model as their own original creation.

License