Case for raspberry pi 4 with 5 inch display for Klipper.
The design revolves around the display: CUQI brand 5 inch DSI touch display from amazon.
I am using this display since a couple of days with a Klipper installation. This is not a recommendation, but in case you might have this already, this case could be useful for you.
The screw-holes are for 4M threaded inserts.
There are cut-outs inside the case for the display connections. USB connectors, etc.
Print the back cover standing up, that way no supports are required.
Note: with the current Klipper image the touch function of the display will not work. You'll need to adjust some settings in the /boot/config.txt to “dtoverlay=vc4-fkms-v3d”
The author marked this model as their own original creation.