Xtool D1 Pro 20w Air Assist with Laser Shield

Remix of the Xtool Safe Air Assist to make it usable with the laser shield still on for the Xtool D1 Pro 20w. Provides a better air assist angle inline with the laser beam, uses a standard 3d printer nozzle to direct airflow. 

This may collect a bit of dust around the laser but does afford a little more eye protection while the laser is running. Use at your own risk as always be safe and follow any and all safety procedures. 

NOTE: Because of its awkward orientation I added a support blocker around the hose entrance to prevent support material from blocking airflow. (See picture)