9.7L "Chimney style" ITX PC case

Mini ITX Case as seen in this video (guide): https://youtu.be/OsDuiwyvBx8

Recommended minimum print volume to print this: 300x300x300

I printed all parts with a 0.6mm nozzle with 2 external perimeters and 20% infill with a layer height of 0.4mm.

PARTS USED IN THIS BUILD: (affiliate links) 

ASUS B460i mITX Motherboard: https://amzn.to/2QZgn4q

Intel Core i5 10400: https://amzn.to/3fVGIJ2

Noctua L9i CPU Cooler (chromax): https://amzn.to/3wFj5v3

Gigabyte 1660 Super ITX OC: https://amzn.to/2R0Sidv

Corsair SF450 PSU: https://amzn.to/3wzg8w2

Kingston A2000 1TB SSD: https://amzn.to/3oYCepe

Noctua NF-A14 PWM Fan: https://amzn.to/2TgMTQe

THE POWER BUTTON IS 12MM WITH A 17,5MM HEAD. Here are some that should fit: https://amzn.to/2QZvtH5 

SCREWS Required: 

Standard computer fan self tapping screws. https://amzn.to/34spuOm (These are used for the baseplate to sidewall mounts, as well as the psu "clamping plate" piece, and the rear plate. In total you need around 20 pcs) 

The feet and top plate requires 8x 30x5mm self tapping flat head wood screws (With the cone shaped head to get countersunk). And the two rear screws for the outer shell are 13x4.5mm self tapping wood screws, any length from 12-15mm should work fine. 

To mount the motherboard you need 4x M3 machine screw with 4x M3 nuts and 4x M3 washers.