Variant of my Travel Dice holder for holding an entire set – or up to 5 sets – of DnD dice. The lid screws on, and you can string the entire thing, which even prevents you from losing the lid.
See here for the original: https://www.printables.com/model/435582-travel-dice-holder
The lid uses the Knurled Surface Library here: https://www.thingiverse.com/thing:32122
and both parts use the threading library here: https://github.com/adrianschlatter/threadlib
The threaded parts (and knurls) should be printed at a smaller width (I used 0.12mm and 0.15mm), but everything below the threads doesn't really matter (I used variable width to print that at 0.3mm)
IMPORTANT: The threads on the lid should be thick to prevent damage when screwing/unscrewing. I used 5 walls when printing the lid.
The author remixed this model.
Version for a set of DnD dice