M4/AR15 Delta Ring Wrench

Having bought a airsoft M4 I found that my handguard and outer barrel were quite wobbly, to fix I needed just to tighten down my delta ring.

But to do that you would need an armorers wrench which are not that easy to obtain where I live, and getting it done with a normal wrench or screwdrivers on a brand new replica was not an option.

So after some measurements I designed this and made it to fit a normal sized M4/AR15 delta ring.

It also includes a small hole to hang it on your tool rack or take it with you on a chain on the field.

Don't have a printer yourself? Contact me on my Etsy store and I'll be happy to print it for you: https://www.etsy.com/shop/XDr4g0nX3DPrinting

Print Settings

Printer:

GEEETech i3 Pro B Metal

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

.15mm layer height

Infill:

50%

Notes:

Print it with some more shells and infill then normal for a strong part.
If the fit is not right for your rifle, adjust your flow or scale in the X/Y axis.