Led Module Holder (Magnetic + VSlot)

Magnetic and VSlot-mounted led module holder
1
17
0
189
updated April 23, 2023

Description

PDF

Depending on your printer frame, you may prefer one version or the other. 

If your printer frame has some steel components, I would strongly suggest the magnetic mount: it is very firm once attached, but it can be attached and detached very easily.

If your frame is composed by VSlot extrusion, you can either use the VSlot version, or use a T-nut with the original holder the led module comes with.

The wire hole of all models has been enlarged in order to easily let trough ferrule-crimped terminals.

For the magnetic version, the magnet housing has a pretty tight fit, the small hole above can fit a short M3 screw to help you get them out if you need.

The print time for the pair is around 20 mins depending on your profile.

The reduced version aim at reducing the amount of light blocked by these holders, it could be fundamental if you use black PLA for the print, since it could distort due to heat. I used black PETG and I didn’t have any problems.

Materials:

2* 8x3mm magnets for the magnetic version

 

If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.

https://ko-fi.com/addictivemanufacturing

 

Tags



Model origin

The author marked this model as their own original creation.

License