Gridfinity 1x1 6mm magnet holder

Holder for all of the magnets to glue into gridfinity bins and baseplates
13
86
1
1078
updated March 30, 2023

Description

PDF

I wanted a way to store the magnets for gridfinity while also maintaining the polarity.

 

The bottom magnets are embeded so you need to add a PAUSE/MO when slicing.  This was layer 12 using 0.2mm layer height.  I glued magnets into the grooves on the top.  this way you can stack up the magnets on top of them. I had planned to embed those, but the magnets on the bottom where flipping them.  Be sure to use just a small drop of glue, two magnets makes it difficult to remove the stack.s

Model origin

The author marked this model as their own original creation.

License