Dual Blower Fan Duct for Creality CR-6 SE - BullHead Mk1

Say "Hello!" to the BullHead Mk1 Hotend Cover!

I have designed a Dual Blower Fan Duct for Creality CR-6 SE 3D Printer. It allows for better part cooling and increased print speed and quality!

Bill of Materials

• M3 Threaded Inserts - https://geni.us/ThreadedInserts
• M3 Round Head Screws - https://geni.us/M3-Screws
• M2 Round Head Screws & Hex Nuts - https://geni.us/M2-Screws
• 4010 Radial Fans (2x) - https://geni.us/4010Fan
• 4010 Axial Fan - https://geni.us/24VAxial 
• 40W Heating Cartridge https://geni.us/40WCartridge
• Shrinking Tubes - https://geni.us/ShrinkTubes
• JST-XH Connectors & Crimps - https://geni.us/JST-XH

Print Settings

• Filament: PETG - https://geni.us/PETG
• Print Temp: 245 °C
• Bed Temp 70 °C
• Perimeters: 3
• Infill: 25%
• Support: Paint on supports for selected parts 
• ome parts should be turned around for better printability

I am printing with a Creality CR-6 SE

Check out my YouTube Video for more details: https://youtu.be/EKCkAO5p_9o

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)