I found this great rocket model but I wanted to print it in more colors so I remixed the model a bit and cut it into parts so it could have open options for color combinations.
The parts are easy to print because each part has a stable and flat surface so that they lie securely on the buildplate.
I used printed pins and glued with super glue for the connection.
You need to print 13 pieces of Pin_01 to connect.
Fin_stand_01 and Fin_wing_01 don't need pins, the parts fit into each other and then fit together into Body_01.
I recommend printing the flame part upside down so that you don't have to put supports, but it is recommended to include a brim for better adhesion because the contact area is small.
It is necessary to turn on support only for Fin_wing_01.
I also added a zip file so you don't have to download one part at a time.
I hope you will enjoy the model and I wish you good luck with printing.
The author remixed this model.