Bit of a random one, created for own use, but thought I would upload it anyway.
The brackets that came with our Lenco DVP-939 were really unsuited to our car, so I created something custom to fit.
The main parts are ABS in my case, the pad is printed in TPE to try and cause some flexibilty and friction to the TVs.
Needs 8x M5 Cap heads, and a 100mm long bit of M6 threaded rod with 2 nuts.
Bit of a random one, created for own use, but thought I would upload it anyway.
The brackets that came with our Lenco DVP-939 were really unsuited to our car, so I created something custom to fit.
The main parts are ABS in my case, the pad is printed in TPE to try and cause some flexibilty and friction to the TVs.
Needs 8x M5 Cap heads, and a 100mm long bit of M6 threaded rod with 2 nuts.
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Notes:
ABS for Main
TPE for Pad
The author marked this model as their own original creation. Imported from Thingiverse.