AMS Stacking Stand Remix

I like MihaiDesigns' idea and the P1P Armor Modplate. This is a remix of Bambu Lab AMS Stacking Stand with Armor Modplate style.

All gaps for assembly are intentionally very small. If it's difficult, please use a tool like a rubber mallet.

Update (Aug. 15, 2023)

All pins are redesigned for better strength. Thanks for the great idea! @djwhouse Now, pins can be printed horizontally.

Update (Mar. 24, 2023)

AMS Stand Rod V2 files replaced with V2-1 (slightly shorter length corrected).

Update (May 14, 2023)

The taller version is uploaded.

Pins are separate parts because they need more strength, so at least 50% infill and 4 wall loops are recommended.

* If you want to push the lower AMS further back, please use Pin4 v2 & Pin4-Spacer instead of Pin3 v2. I will show you the difference with photos soon.  

• Pin1 v2(13mm) & Lock : for assembling bracing parts.
• Pin2 v2(40mm) : for connecting upper and lower parts of side panels.
• *Pin3 v2(20mm) : for joining bracing assembly and side panels.
• *Pin4 v2(50mm) & *Pin4-Spacer : (Deeper) for joining bracing assembly and side panels.

----------------------------------

If you like to keep using the old version stand, I am sorry… you have to glue or drill holes.

You can print AMS Tall Stand Left-1.stl & Right-1.stl files and need to glue them to your existing stand. Using pins by drilling holes is not stable enough.

Also, a new bracing assembly is recommended for rigidity, but you need to drill holes(Dia. 8mm). The distance between holes is 120mm. Please refer to the new modeling parts.