PS4 Controller - Extended Triggers and Buttons
A 3 part print that can attach non-destructively to a game controller to allow for non-standard hand positions.
21
87
0
881
updated March 23, 2023
Description
PDFA 3 part system which works on extremely simple spring mechanism! Printed in PLA.
Layer height : 200um / 0.2mm
Walls - 6 (minimum)
No supports required
Brim may be necessary (use glue on PEI sheet instead of brim if required)
Print in the orientation the STL is only - or see where the 2 notches are with a chamfer and place that side on the print bed.
Useful for anyone with small hands / kids. Also useful for people having clenched fist syndrome or more. The ‘horns’ can be tweaked and modified according to the requirements - Have uploaded the .stp files.
Attaching the Trigger & Buttons to the clip has to be followed in these 3 easy steps.
Tags
Model origin
The author marked this model as their own original creation.
