This is a simple baseplate for the NVidia Jetson Nano development board along
with a Raspberry Pi v2.1 camera holder. It can be tilted and panned. To
assemble it, you will need:
1 x M3, 20 mm with a nut.
No support is required. An infill of 20 to 30% is sufficient. A built-in raft
is included in the Camera holder model. It must be removed after printing.
This object main web page is:
http://www.ctheroux.com/jetson-nano-base-with-camera/.
You can request the source files on the page listed above.
The author marked this model as their own original creation. Imported from Thingiverse.