Pi Camera Bed Mount

This is an articulating Raspberry Pi Camera mount. I designed it specifically for my Tronxy X1 but it can be used on other printers as well.

Required Hardware

Pi Camera - https://www.amazon.com/gp/product/B01ER2SMHY/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=srgnballgam08-20&linkId=028bc89a9db7d0b42ea4716749a6c14b&language=en_US

Pi Camera Cable 18" - https://www.amazon.com/gp/product/B01ER2SMHY/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=srgnballgam08-20&linkId=028bc89a9db7d0b42ea4716749a6c14b&language=en_US

Pi Camera Cable 12" - https://www.amazon.com/gp/product/B01ER2SMHY/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=srgnballgam08-20&linkId=028bc89a9db7d0b42ea4716749a6c14b&language=en_US

M4 Hardware - https://www.amazon.com/gp/product/B01ER2SMHY/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=srgnballgam08-20&linkId=028bc89a9db7d0b42ea4716749a6c14b&language=en_US

Print Settings

Printer:

Tronxy X1

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.2

Infill:

20

Filament:

Red

Notes:

Supports only really needed for pivoting mount

Remove supports, bore/debur holes, use M3 screws to hold joints together.