Voron 1.8/Trident/2.4 HEPA Filter Exhaust [Remixed fitment with 3 filament input holes]

This is a remix of these two excellent designs:

• Original design: https://www.printables.com/model/161906-voron-18trident24-hepa-filter-ex
• Remixed design (the one I ended up using for my own setup to fit my HEPA filters): https://www.printables.com/model/323674-voron-24-hepa-filter-exhaust-wmagnetic-cover-filte

This model only includes the two new/modified parts:

• Remixed fitment that includes 3 filament input holes (one on the top, and one on each side) for increased flexibility. Each hole can fit a PC4-M10 bowden connector.
• A plug to close the input holes you don't use. Print one for each unused hole.

I've cut some carbon filter fabric and fitted it behind the HEPA filter to help further contain toxic fumes. I've also removed the rubber corner pads from the Noctua fan to improve the seal.

I've also followed this guide to set things up with Klipper and my Octopus board: https://www.nicksherlock.com/2022/01/driving-a-4-pin-computer-pwm-fan-on-the-btt-octopus-using-klipper/

Here are the items I've used (affiliate links):

• Noctua fan: https://amzn.to/3VItlAq
• Carbon filter: https://amzn.to/42xkILk
• HEPA filters: https://amzn.to/44IDS2T

If you like what I'm doing…

…consider buying me a ☕ on Ko-Fi.

Remixed fitment with 3 filament input holes