Bed and Frame Cable Chain Mount

Mounting pieces for attaching a cable chain from the frame to the heatbed
43
182
1
2860
updated March 17, 2023

Description

PDF

Bed and Frame Cable Chain Mount

 

This design consists of two parts that allow a cable chain to be attached between the print bed and the frame of the printer.
Like, for example, the printable cable chain I shared earlier
the parts are designed to be printed without using support. The stl files have already been placed in the correct print position and therefore no longer need to be rotated in the slicer.

 

When designing the cable chain mount on the print bed, consideration has been given to the spring pressure of the set springs under the print bed, or the use of silicone spacers if necessary. In many cases, the cable support bracket is attached to the top of the bracket under the print bed. This puts more pressure on one of the springs under the bed than on the other three. By mounting the bed chain mount under the bracket between the bracket and the adjustment knob, all springs under the bed remain under the same pressure. and when using silicone spacers, one of the spacers does not have to be shortened.

 

Required material:

6x Heat Insert M3x5x4.
6x Bolt FHCS M3x6. 
1x Bolt BHCS M5x10. 
1x T hammer nut M5.

 

Recommended print settings:

Material: ABS or ASA. (ABA recommended).
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.

Printable without support!

 

Looking for a printable cable chain?

Click here !

 

→ Please follow, more designs soon !!! ←

Tags



Model origin

The author marked this model as their own original creation.

License