This is actually the first thing I printed in Prusament recycled PETG, still using a broomstick as Spoolholder as the filament spool did not fit my original creality spoolholder. It holds up nicely for 2 months now so I am confidently sharing it.
Note: there are two model files, I used the thin back plate and reinforced it by gluing a thin wood plate on the back as it saves quite some material.
I sanded it down to reduce friction and it works fine.
No suports needed, internals structure is designed to hold the load.
Its fixed with up to 6 M4 Bolts.
Dont mind my messy filament guide into the enclosure.
The author marked this model as their own original creation.