Raspberry Pi - NAS Case

I designed a custom case that fits all the components for a RaspberryPi-NAS perfectly. Whether you're a beginner or an experienced maker, this tutorial is perfect for anyone who wants to build their own NAS system.

Check out the full project guide and documentation in Youtube Video description:

For the Case I used CF-PLA with a 0.6mm nozzle.
Supports: All (just for the holes)
Shells: 3
Layer Height 0.2mm
Infill: 20% Cubic

Due to the geometry on the inside, the case is very rigid.
The platform adhesion ears break away easily.

The Lid can be printed too.

Also check out my homepage at: www.hellgineer.com