AC/DC Fridge Magnet

Printed with Prusament PLA and PETG ind two steps.

Baseplate and logo contour with PLA, inner part with PETG (PLA would also be an option, I had only red filament as PETG).

You need four round 8mm x 1mm neodymium magnets.

The pre-sliced 3MF file and gcode for the baseplate and logo contour has a pause on layer 8 to insert the magnets and a pause for color change and a layer height change to 0.1 on layer 11.

The inner logo part is printed upside down and then simply pressed into the base part. It does not need any glue.

Have fun and let's rock!