This is a simple wallet design made to work with most materials and nozzle-sizes.
The elastic strap can be made in multiple ways. I used a soldering iron to melt the strap together but you could also use superglue or sew it.
The cash strap on the back is made with 2 pieces of electrical tape stuck together so it doesn't stick in the middle.
To make it faster to grab a specific card, you can add a pull tab made of (electrical) tape on the side of the cards.
There is no (technical) limit to the amount of cards it can hold but I recommend up to 5/6.
I printed this on the Sovol SV03, 0.2mm nozzle, 0.2 mm layer height, pla
The author marked this model as their own original creation.