This mount is to attach a Beagle Cam to the Ender 3 S1 Pro. It is articutable to allow many different positions. The peg that is at the bottom of the support arm may need to be sanded for a perfect, tight fit into the base mount. I printed everything 0.20 layer height out of PLA. Every print but the support arm was at 10% infill. Support arm was 25% infill. When printing the support arm, block support structure at the hole on top of the arm. For the support arm, you will need support for the bottom peg. I epoxy'ed the Camera Base and Base Cup pieces together.
The author marked this model as their own original creation.