BMW E46 CLUTCH STOP

Simple clutch stop for every E46 model. You just need an M10 hexagonal bolt, an M10 nut (use it as a locknut) and a washer.

Behind the clutch pedal there is a small plastic cap, with a philips insert. Just unscrew it and you will find an M10 hole created by BMW for this exactly purpose.

The model has a 17 mm hexagonal cavity. Usually the bolt are 16.8 mm so this should be enough room for press it. If it's too loose (means that you have a nice calibration) there is a Ø4 mm hole for a M3 brass insert, with this you can secure the bolt with a tap screw. Or ask me and I'll upload a 16.8 mm version.

In my case I used a soldering iron and a loooot of patience to heat the bolt.