45 Record Adapter | Record

What it is

Adapters for vinyl records. The 9/32 inch central hole is designed without clearance but has equivalents of crush ribs to seat properly. The outer diameter is 1.5 inch also without clearance, the incorporated spring section is a safety measure for your records in case that diameter is printed slightly to large.

Since I do not own any records, this design is untested! - Any volunteers?

What to print

There are multiple variants awaiting you:

	Riffle 2 color print total height 2.6mm
	Shiny 2 color print total height 2.6mm
	TestRun 2 color print total height 2.6mm
	WithAarm 2 color print total height 2.6mm

How to print

Recommended for printing is a 0.6 mm nozzle or smaller and 0.2 mm layer height.

A multi color version is just a matter of simple filament changes between layers. The heights between features differ by 0.2 mm.

In case it won't print neatly after a filament change: A draft shield, wipe tower or any object to consume filament beforehand (establishing good flow by doing so) may help.

Material at one's discretion.

What next

There may be improvements and modifications based on feedback given here.

My adapters with a food resembling look can be found here, the icon-ish ones here.

Yes, the license is restrictive. For the duration of the running contest it will stay that way.

Take a look at my other designs ;-)