SKR_PICO Ender 3 Conversion Mod

My conversion to the SKR Pico

Please note my design excludes the screen. as my printer is in a cupboard and the screen was not been used, and as the SKR Pico is designed for Klipper only, the web browser only option suits me fine.

the models was designed using the flowing criteria.

Must fit the ender 3,

Must fit the Skr_pico and CB1/Raspberry Pi 3B using UART connection.

Simple to print. use as little supports as possible

Use off the shelf screws. Uses Dia 3 x 9 self tapping screws through-out.

Must be able to be printed on the Ender 3

The parts where Printed from ABS, 

Hope you enjoy, and lt me know if you do print it, if you have any issues