"Casper" door welcome sign

With this make,  Casper (or whatever name you want to give it can welcome guests at your door. There are two designs -

1. Casper Peephole
2. Casper Welcome & Welcome Sign

Carefully review the pictures of and associated print files of the design you want.

for the two piece design, only sand lightly and avoid using too much glue : )

This is designed to be held to the door with the Peephole lense, NO GLUE OR SCREWS needed to attach to door so Won’t damage the door at all! Simply unscrew the lens, remove from door, place the 'Casper' Frame with the hole in line with the hole in the door reinstall lens and tighten. 

This is a two piece, two colour print. Manual colour change is easy to do; see the following link help.prusa3d.com/en/article/color-change_1687

On each piece, filament colour recommendation: 1st white, then @ print pause 2nd,  load black.

Print both pieces then sand and glue as shown in the included pictures

Please hit the like ♥ and post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page. Also, Please rate my print if you like it. 
Thanks :D

Thank you for joining my Printables Club and follow me on:
Printables.com
www.facebook.com/profile.php?id=100082036420297
Twitter: @Ozzy_The_Artist

Thanks :o )