Filament holder for Prusa MK3S+

The holder can hold one spool with a diameter of up to 350mm, the second spool can have a diameter of up to 230mm.
The spool width varies from 20mm to 110mm depending on the holder.

I printed almost all the parts in PLA. The "brake" is made of TPU 95A and is only needed for spools larger than 1kg (2.3kg in my example).

The following accessories are needed:
- 2 Allen screws M3x14 (12.9 recommended, max. 20mm long).
- 2 nuts M3
- 2 nuts M8
- 2 screws M8x175mm (depending on the length of the mounting) or a correspondingly long threaded rod and additional nuts.
- 2 ball bearings 61805 or 6805
- 2 ball bearings 6803